Name: Mapping Combo
Price: 279.0 EUR
Availability: InStock

This configurator is for users who are interested in Geotagging and Camera control. Answer the questions below and we will provide the appropriate setup for your case.

Follow along and answer the questions, we will include the correct accessories and updated pricing.

Gremsy v3 seried (S1v3, T3v3, T7)
Other gimbal (DJI Ronin, or other)
No gimbal (Airplane, small copter with fixed camera)

Sony (A7 / A9 / A6x / A5x / Rx1 / other)(Multiple options)
ADTi Surveyor (24L v2 / 61S / 42L / for others please contact us)(+ADTi connection set)
Wiris Pro (or similar)(+SBUS Out cable)
ShareUAV 6100 (for others please contact us)(+ShareUAV connection set)
ViewPro Q10 (all models with serial port)(No addition)

Notice for Wiris users:
Camera control is done via SBUS output, geotagging is done via MavLink forwarding (including DJI drones). We do not include a cable for MavLink connection, you will need to wire-up own serial connection from original connection cable.
Installation manual is available here.

Notice for ViewPro users:
Camera control and geotagging are done via serial connection. We do not provide cable for camera connection as differs from model to model. All you need is to connect GND+RX+TX pins.
Installation manual is available here.

Notice for ShareUAV users:
For ShareUAV cameras, we will include a ShareUAV connection set. Camera control and geotagging are done via serial connection. Geotagging is available only in original ShareUAV mode. Manual for installation is here.

Please select power option for powering of the Entire?
Entire needs solid 5V/1A as power input. Here you can select optional power adaptor combinations.

My gimbal has USB outlet (or Futaba Servo 5V outlet)
I have other Gremsy with PWT OUT (JST XH) outlet
I have other power source of 7-30V
My gimbal has PTAP outlet
Do not include any power option

Please select power option for powering of the Entire?
Entire needs solid 5V/1A as power input. Here you can select optional power adaptor combinations.

My aircraft has internal 5V source with 1A current available.
My aircraft has other power source of 7-30V
Do not include any power option

Camera control mode:
There are two modes you can select for Sony cameras. Plain Entire can during GeoTagging control the camera only via IR or via Wifi, because USB is used in MassStorage mode. As IR commanding is limited (MENU access and Arrows shortcuts) and WiFi is sometimes unstable or unavailable (can be used only at newer cameras without SmartMemories application – A7R3 and older), there is option to use SmartPlug for full camera control during geotagging. Because price matters, please select your option:

Full Control & Geotagging via SmartPlug
Control & Geotagging via WiFi or IR only

Select camera model category:
Here we will select proper SmartPlug model. Please note that SmartPlug needs 12-14,5V power input!

I have newer Sony camera with NP-FZ100 battery (A7R3, A7R4, A9, etc.)
I have older A7 Sony camera with NP-FW50 battery (A7R2 and older.)
I have PhaseOne Industrial camera
I have other (ADTi Syrveyor, Sony A6x, RX1, RX100 or other., Wiris) camera

How you would like to control the Entire:
Please select your preffered way for commanding of the Entire.

	1 × PhaseOne iX-Link cable In stock	€259.0
	1 × AIR Commander Link v2 In stock	€219.6
	1 × ADTi camera connection set In stock	€79.0
	1 × Power adaptor - uBEC In stock	€19.9
	1 × Power adaptor -> Gremsy Cable In stock	€1.9
	1 × PTAP - JST PH (PowerAdaptor / SmartPlug) In stock	€8.9
	1 × A9 Smart plug In stock	€160.6
	1 × A7 Smart plug In stock	€132.1
	1 × Gremsy (v3) geotagging cable set In stock	€149.0
	1 × Universal geotagging cable set In stock	€129.0
	1 × Simple geotagging cable set In stock	€29.0
	1 × USB Splitter In stock	€11.8
	1 × ShareUAV camera control cable set Available on backorder	€109.0
	1 × SBUS out cable Available on backorder	€24.9

Mapping Combo

Related products

AIR Commander ENTIRE R3

Cinema Combo

AIR Commander ENTIRE Combo